Home > Walk in Environmental Test Chamber >

Durable Walk In Environmental Chambers With Temperature Humidity Controls

Product Categories

Temperature Humidity Test Chamber [30]
Walk in Environmental Test Chamber [8]
ESS Test Chamber [10]
Thermal Shock Chamber [28]
Altitude Test Chamber [8]
AGREE Vibration Chamber [10]
Climatic Test Chamber [12]
Battery Testing Equipment [4]
Mechanical Test Equipment [4]
Lab Drying Oven [26]

ATMARS INDUSTRTY CO., LIMITED

Contact Now

Durable Walk In Environmental Chambers With Temperature Humidity Controls

Name: Durable Walk In Environmental Chambers With Temperature Humidity Controls
Brand: ATMARS
Price: 1 USD

Best Durable Walk In Environmental Chambers With Temperature Humidity Controls wholesale

Brand Name : ATMARS

Model Number : AHW-12 SERIES

Certification : ISO, CE

Place of Origin : Guangdong, China

MOQ : 1 Set

Price : Negotiable

Payment Terms : L/C, T/T, Western Union

Supply Ability : 15 Sets Per Month

Delivery Time : 30 Working Days

Packaging Details : Wooden Box

Capacity : 12m³

Application : Temperature and/or Humidity Test

Power Supply : 3 Phase, 380V, 50Hz

Product Name : Walk In Environmental Chambers

Contact Now

Walk in Environmental Chambers with Temperature and Humidity Controls

Available in FOUR standard temperature ranges:
Type A: -20℃ to +150℃
Type B: -40℃ to +150℃
Type C: -60℃ to +150℃
Type D: -70℃ to +150℃

Standard humidity range: 20%RH to 98%RH (Optioal lower humidity is available.)

What is a Walk-In Chamber?
Walk-In Chambers from ATMARS serves as an ideal test site for large components, assemblies, and finished products. We manufacture both Panel (modilar) Walk-In Chambers and Solid (welded) Walk-In Chambers and can be configured as a temperature chamber or a temperature humidity chamber. A Panel Walk-In Chamber is made from lightweight insulated panels for fast and easy installation.

ATW/AHW Configurations:
ATW Series - Temperature only
AHW Series - Temperature and humidity capability

Technical Specifications of AHW-12 SERIES Walk-in Environmental Chambers Performance is based on ambient temperature +20 ℃ or circulating water temperature +25 ℃, empty load no specimen.
Model		AHW-12A	AHW-12B	AHW-12C	AHW-12D
T&H Adjustment Mode		Smart balanced temperature (humidity) control - BT(H)C
Performance	Temperature Range	-20℃ to +150℃	-40℃ to +150℃	-60℃ to +150℃	-70℃ to +150℃
	Temperature Fluctuation	±0.5℃
	Temperature Uniformity	±2.0℃
	Temperature Devitaion	±2.0℃
	Heat-up Rate (Average)	From -20℃ to +150℃ 3℃/min.	From -40℃ to +150℃ 3℃/min.	From -60℃ to +150℃ 3℃/min.	From -70℃ to +150℃ 3℃/min.
	Cool-down Rate (Average)	From +20℃ to -20℃ 1℃/min.	From +20℃ to -40℃ 1℃/min.	From +20℃ to -60℃ 1℃/min.	From +20℃ to -70℃ 1℃/min.
	Humidity Range	20％RH to 98％RH
	Humidity Fluctuation	±2.5％RH
	Humidity Deviation	±3.0％RH when Humidity＞75％RH; ±5.0％RH when Humidity≤75％RH.
Workspace Volume		12m³
Workspace Dimensions		W2000xD3000xH2000mm
Exterior Dimensions		W2350xD4950xH2400mm
Material	Interior	#SUS304 Stainless Steel
	Seal	Imported silicone seal
	Insulation	Expanded foam & fiberglass
	Exterior	Cold-rolled steel with powder coated surface
System	Heating	Nichrome Resistance Wire Heater
	Refrigeration	Mechannical Refrigeration System
	Humidification	Stainless Steel Humidifier (Vapor generator system)
	Controller	Programmable Touch-screen Controller
Noise Level		≤70dB (A-weighted sound pressure level measured at a distance of 1.0 meter)
Allowable Ambient Conditions		Temperature: +5℃ to +35℃; Relative humidity: ≤85％RH (No condensation); Air pressure: 86kPa to 106kPa.
Power Supply		AC 380 (1±10％)V (50±0.5)Hz 3 Phase 4 Wire plus Earth Wire
▲Custom options are available.

Test Standards Conformance
GB/T 10586-2006 Specifications for damp heat chambers
GB/T 10592-2008 Specification for low/high temperature test chambers
GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2: Testing method—Test Cab: Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12h+12h cycle)
GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods - Test N: Change of temperature
GJB 150.3A-2009 Laboratory environmental test methods for military material - Part3: High temperature test
GJB 150.4A-2009 Laboratory environmental test methods for military material - Part4: Low temperature test
GJB 150.9A-2009 Laboratory environmental test methods for military material - Part9: Damp heat test
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-78:2012 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

Durable Walk In Environmental Chambers With Temperature Humidity Controls

Product Tags:

walk in environmental chamber

walk in stability chamber

Durable Walk In Environmental Chambers With Temperature Humidity Controls Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	ATMARS INDUSTRTY CO., LIMITED
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!